Application

Shrubs and trees

Application of Solid BHS for shrubs and trees:

  • When the seedling is planted, insert in each planting hole cca 200-500 mL of Solid BHS, then mix well with the soil, irrigate, then continue the planting process itself.
  • For the nutrition of the shrubs and fruit trees, the product is distributed evenly below the crown at a rate of 200 ml of Solid BHS per m2.
  • For maintenance, mix evenly approximately 200 ml of product with soil and finally irrigate.

Application of Liquid BHS for shrubs and trees:

  • The seedlings can be submerged in liquid admixture of BHS and water, in which the concentration of liquid humus is of 3%. They will be maintained one day like this, then they can then be planted.
  • Watering trees with BHS liquid and water mixture require a lower concentration of liquid humus, of 2%.
  • For feeding the leaves, a concentration of liquid BHS of 1% combined with water can be sprayed directly onto the leaves of the tree fruit bush.
  • Also, during the sprouting and intensive growth of the fruit is recommended spraying and in the ripening process, watering with liquid humus compound and water is recommended.

Application of Pellets BHS for shrubs and trees:

  • Spread evenly, 200 g fertilizer/ tree, mix, then irrigate

Species of trees susceptible to deficiency in nutrients:

# Element Species
1 Azote Black currant, plum, apple
2 Phosphorus Gooseberry, apple
3 Potassium Gooseberry, red currant, apple
4 Calcium Apple
5 Magnesium Gooseberry, black currant, apple
6 Iron Apple, pear, plum, raspberry
7 Boron Apple
8 Manganese Cherry, apple, raspberry
9 Zinc Citrus, apple, pear

Application of Solid BHS for vegetables:

When preparing soil mixtures for seedling growth, add one part of humus with 5 parts of the ground vegetation or peat.

  • Carrot and green herbs : At their seeding in furrows, spread the humus evenly over the entire swath at a rate of 100 - 200 mL per m2. Mix the ground, irrigate, and finally add the seeds.
  • Tomatoes, cucumbers and peppers : Place the hummus in each planting pits, each 20-30 mL, mix with basis soil and irrigate profusely. After planting the cucumber seedling, we recommend soil protection around the plant with 1 cm layer of humus (mulch).
  • Potatoes : When potatoes are planted, about 20-30 ml of humus should be inserted below each tubercle.
  • Garlic : When seeding autumn garlic, the humus is distributed uniformly over the entire row at a rate of 100-200 ml per m2. Mix with basic soil to a depth of 8-10 cm.
  • Watermelons and yellow melons : When planting watermelons or yellow mellons, the humus is inserted in amount of 50-100 ml in each planting hole.

Application of Liquid BHS for vegetables:

  • Foliar application: Foliar fertilizer solution is used in the proportion of 1: 100
  • Soil treatment: soil treatment solution is used in the proportion of 1:10 (1l fertilizer dissolved in 10 l of water)
  • Pre sowing treatment: the seeds should be soaked in a solution of 3% (1:30) and left like that for 24 hours. Then, they should be sowed in maximum two days from the treatment.
  • Feeding the roots: root fertilization solution is used in the proportion of 1:50.

Application of Pellets BHS for vegetables:

  • Insert in each hole upon planting, 300 g/ each, homogenize with base soil, irrigate abundantly, then plant

Application of Solid BHS for big crops:

BioHumusSol reduces seed germination period, accelerate the development of seeds and reduce their ripening time. For soil fertilization on large areas for a period of 5-7 years there are required 150-200 liters / ha of product.

Application of Liquid BHS for big crops:

  • Foliar application: Foliar fertilizer solution is used in the proportion of 1: 100
  • Soil treatment: soil treatment solution is used in the proportion of 1:10 (1l fertilizer dissolved in 10 l of water)
  • Pre sowing treatment: the seeds should be soaked in a solution of 3% (1:30) and left like that for 24 hours. Then, they should be sowed in maximum two days from the treatment.
  • Feeding the roots: root fertilization solution is used in the proportion of 1:50.

Application of Pellets BHS for big crops (WHEAT, BARLEY, OATS, CORN, CANOLA, RICE, SUN FLOWER, SUGAR BEET, ETC.):

  • Place near the seed min 25 kg/hectare

Benefits:

  • Improves soil structure;
  • Enriches the soil with valuable nutrients;
  • Better absorption of mineral fertilizers applied subsequently;
  • Protection of plant from specific or root rot diseases.

Because the grass is cut often, about once a week, it loses nutrients. Therefore, a fertilization is necessary after each such procedure. Fertilizing your lawn is important, especially in the spring because it supports normal and its harmonious growth with the upcoming heat of the summer.


Application of Solid BHS for grass:

  • Solid BHS is distributed equally over the entire surface of land, 50-70 ml / m2.
  • This process is repeated at the planting after trimming and whenever fertilization is necessary.
  • Finally irrigate the entire surface of the lawn.

Application of Liquid BHS for grass:

  • Foliar application: Foliar fertilizer solution is used in the proportion of 1: 100
  • Soil treatment: soil treatment solution is used in the proportion of 1:10 (1l fertilizer dissolved in 10 l of water)
  • Pre sowing treatment: the seeds should be soaked in a solution of 3% (1:30) and left like that for 24 hours. Then, they should be sowed in maximum two days from the treatment.
  • Feeding the roots: root fertilization solution is used in the proportion of 1:50.

Application of Pellets BHS for grass ( lawn ):

  • Spread evenly on the entire surface, 50 g/sq. m (upon planting and after mowing), then irrigate

Application of Solid BHS for flowers and other plants:

  • Distribute evenly 10 ml (~ 2 teaspoons) / 1l pot on the substrate surface
  • Fold in the pot with soil by mixing solid BHS with a stick, and finally irrigate.

Application of Liquid BHS for flowers and other plants:

  • Foliar application : Foliar fertilizer solution is used in a proportion of 1:100.
  • Feeding root: root fertilization solution is used in a proportion 1:50.

Application of Pellets BHS for flowers and other plants:

  • For house plants : Add 10 g (2 tb. sp.)/1L pot , mix, then irrigate
  • For decorating flowers and plants : Spread evenly, 50g/ plant, mix, then irrigate

Application of Solid BHS for conifers:

BIOHUMUSSOL is recommended for all types of conifers such as fir, pine, cedar, spruce, juniper, cypress and all green plants. Distribute evenly at a rate of 300-500 mL fertilizer / 50 cm tall conifer. Mix and irrigate.

Application of Liquid BHS for conifers:

  • Foliar application: Foliar fertilizer solution is used in a proportion of 1:100
  • Feeding the roots: root fertilization solution is used in a proportion of 1:50.

Application of Pellets BHS for conifers:

  • Biohumussol is recommended for all types of conifers such as fir tree, pine tree, cedar, spruce, juniper, cypress and all green plants Spread evenly 300-500 g of fertilizer/ 50 cm high conifer.

Our products are 100% ecologically certified!